Fabmax：Press brake tools

Fabmax’s mission is to simplify your press brake tools shopping and purchasing process. Online purchasing has been growing extremely fast over the last decade and we believed it was time for a change in our industry.

2V Die

2V Dies to eliminate the need for set screws. With two openings on the same die, efficiency is increased. Available with angles ranging from 30 to 90 degrees and V openings from 0.157″(4mm) to 0.984″(...

Multi-V Die

Multi-V dies offer the ultimate flexibility and efficiency with up to 4 V openings available. Available in angle ranges from 180 degrees and V openings from 0.236″(6mm) to as wide as 1.968″(50mm).

Single-V Die

1V Dies are available in angles of 30 or 88 degrees with V openings between 0.157″(4mm) and 0.984″(25mm).

T-style Die

T-style Dies are available with an angle range from 30 to 90 degrees, V openings from 0.236″(6mm) to 0.984(25mm), and heights of 3.149″(80mm) or 4.724″(120mm).

Shearing blade

Knives for different shear machines can be produced from other material grades in various hardnesses to suit your application.

Standard Punch

Low profile, “general purpose” punch that is perfect for bending 90-degree angles.

Sash Punch

A straight, thin punch with a sharp relief offset at the bottom that is perfect for making a door sash.

Acute Punch

Acute punces are available in angles from 30 to 60 degrees.

Gooseneck Punch

Deep profile punches designed to allow for large return flanges in the workpiece.

LATEST NEWS

What excess tonnage does to a press brake and tool...

discusses the negative impacts of overloading on press brakes and their tooling. The article focuses on how excessive tonnage can damage the press brake's structure, accuracy, and tooling life

Learn more

How to Select the Perfect CNC Press Brake Die for ...

Finding the right CNC press brake die is essential for manufacturing precision, efficiency, and cost-effectiveness.

Learn more

9 strategies for preventing part collisions on the...

The article "9 Strategies for Preventing Part Collisions on the Press Brake" outlines nine practical strategies to prevent part collisions on press brakes. Collisions can cause damage and decrease pro...

Learn more

FABMAX makes a Big Impression at TIMTOS 2025

Learn more

Press brake strategies: Bending the right part at ...

In the sheet metal bending process, choosing the right strategy is crucial. This article explores how to optimize the bending sequence, select the appropriate tooling, and adjust bending parameters to...

Learn more

The absolute necessity of aligning press brake too...

Why precision-ground tooling may be worth the investment

Learn more

CATELOG

Do you want to know more about our tooling?

Download now and be welcomed to the next level.

Download

Message

If you have any suggestions or question for us.Please contact us.

Your distributor always nearby

Fabmax has branches in Taiwan, India, and England. Outside these countries, a global network of carefully selected partners provides advice, sales, and service. This fully guarantees your continuity and local support.